RCS-Air - EnviroTemp® Eliminates Oil Fouling in HVAC+Rises HVAC+R

EnviroTemp is the only industry proven nano-science chemical that permanently restores COP and Delta T of all types of HVAC+R equipment through thermodynamic metal enhancement.

EnviroTemp is a thermal nano-surface coating. It coats the metal at the atomic level displacing the non-thermal conductive oil on the internal surfaces of HVAC+R equipment, increasing its volumetric heat transfer properties and protecting against corrosion. EnviroTemp is a one time only installation that will reduce the kilowatt consumption and runtime of the HVAC+R system and provides for significant cost savings.

EnviroTemp® Eliminates Oil Fouling in HVAC+R

Improves COP and Delta T of all types of HVAC+R equipment through thermodynamic metal enhancement.

Oil sticks to metal surfaces

Oil blocks heat from moving through metal

SOLUTION: Remove the oil.
NO ENERGY LOSS

Move heat more effectively
MACHINE RUNS LESS, OPERATIONAL COSTS REDUCED

What EnviroTemp Does

EnviroTemp® Eliminates Oil Fouling in HVAC+Rises HVAC+R - Increase the thermo-conductive properties of the coil system through nano-magnetic filming and electron transfer enhancement

Increase the thermo-conductive properties of the coil system through nano-magnetic filming and electron transfer enhancement

EnviroTemp® Eliminates Oil Fouling in HVAC+Rises HVAC+R - Regain the lost efficiency caused by oil migration by displacing the barrier of conductive oil

Regain the lost efficiency caused by oil migration by displacing the barrier of conductive oil

EnviroTemp® Eliminates Oil Fouling in HVAC+Rises HVAC+R - Allows the HVAC+R unit to move more heat, reaching the thermostat set-point faster, run less and consume less kWh

Allows the HVAC+R unit to move more heat, reaching the thermostat set-point faster, run less and consume less kWh.

EnviroTemp is a patented product, installed successfully in thousands of installations worldwide. The technology is scientifically proven, has long term customer history and is verified by recognised third parties. However, don’t just take our word for it, below see what A.S.H.R.A.E, a world leading authority on HVAC+R equipment has to say about the problem of oil fouling.

A.S.H.R.A.E (American Society of Heating, Refrigeration and Air-Conditioning Engineers) has studied the problem of oil fouling. A.S.H.R.A.E estimates that this thermal barrier accounts for up to a 30% reduction in efficiency within the first 5 years of the equipment life.As studied by A.S.H.R.A.E, during the refrigerant compression process, oil migrates from the compressor to the coil system contaminating the metals that transfer heat. Compressors that use oil for lubrication do not prevent oil from fouling the coil system. Even the smallest amount of oil in the coil system creates a film or coating that will hinder heat transfer reducing the efficiency of the unit.gs.

EnviroTemp is a High Value Energy Conservation Measure

Unmatched in terms of financial return
For most installations the decrease in kWh consumption equates to between 10% and 15% power bill savings
Installation is simple and will not interrupt your business during roll-out.
Equipment runs less and lasts longer. Extend the life of your HVAC+R assets.